Sika

Sikafloor-510 N LPL

Sikafloor-510 N LPL is a two-component, solvent-free, high-solids, low-viscosity polyaspartic coating. It is typically used as a water-clear, glossy topcoat over decorative quartz or flake broadcast systems when a fast-cure, UV-resistant finish is required. It can also be used as a primer, binder or sealer, and it meets CFIA requirements for food plants.

  • Water-clear; viscosity about 500 cPs (A+B); Shore D hardness about 80 (ASTM D2240)
  • Abrasion about 0.037 g loss, CS-17 / 1,000 cycles (ASTM D4060); pull-off greater than 2.7 MPa (400 psi), concrete failure (ASTM D7234)
  • About 160–200 sq ft per US gal as a primer at 8–10 mils, or 105–135 sq ft as a wear coat at 12–15 mils
  • Packaging: Component A 7.57 L (2 US gal) and Component B 5.03 L (1.33 US gal)
  • Shelf life 1 year at 5 °C to 32 °C; PDS June 2026, Version 01.04

The mix ratio is 3:2 by volume (A:B). VOC is less than 50 g/L. Apply at 10 °C to 30 °C and 30% to 75% relative humidity. At 20 °C, pot life is about 30 minutes and foot traffic is about 4 hours.

In stock at our Surrey warehouse — request a quote for project pricing.

View Technical Information

Safety Data Sheet (PDF)

Request a Quote

Description

Description

Sikafloor-510 N LPL is a two-component polyaspartic resin with good abrasion and UV resistance. We offer it as a clear or topcoat layer in decorative flake and quartz floor systems.