Coating Pedestrian - Vehicular

Planiseal MB

Planiseal MB is a 100%-solids epoxy moisture barrier used to control moisture under toppings and to consolidate weak or dusty surfaces. It is for interior use on sound concrete at least 7 days old (5 days for post-tensioned concrete) with MVER up to 25 lb per 1,000 sq ft per 24 hours (ASTM F1869) and/or RH up to 100% (ASTM F2170). It is also used on cured gypsum underlayments and lightweight concrete.

  • Density 1.05 g/cm³; viscosity 190–230 cps; tested at pH 14 (ASTM D1308)
  • Moisture-vapour reduction greater than 96% at 8 mils DFT (ASTM E96-05)
  • Pull-off greater than 1,000 psi (6.90 MPa), failure in concrete (ASTM D7234)
  • Coverage about 125–160 sq ft per US gal at 10 mils WFT
  • Packaging: Part A 2.2 US gal (8.33 L) and Part B 0.8 US gal (3.03 L); shelf life 2 years

Prepare concrete to CSP #2 to #3. Typical application is about 10 mils wet film. At 23 °C, open time is 90 minutes and drying time is 5 to 6 hours. Permeability is less than 0.1 perm above 10 mils DFT (ASTM E96). VOC is typically 39 g/L.

In stock at our Surrey warehouse — request a quote for project pricing.

View Technical Information

Safety Data Sheet (PDF)

Request a Quote

Description

Description

Planiseal MB is a two-component epoxy moisture barrier for concrete slabs. We supply it to treat slabs with high moisture vapour emission or relative humidity before flooring or coatings go down.