Coating Pedestrian - Vehicular

Mapefloor CPU/TC

Mapefloor CPU/TC [NA] is a multi-component polyurethane/cement coating for horizontal and vertical finishes on Mapefloor CPU industrial floors. It is also used as a protective coat on concrete and on cementitious walls and joints, and to lock broadcast aggregate in anti-slip finishes.

  • Film thickness typically 8 to 10 mils
  • Coverage about 187 sq ft per kit at 8 mils over a Mapefloor CPU screed, or 165 sq ft at 10 mils over CPU/Cove
  • Typical VOC 8 g/L, and less than 350 g/L, under SCAQMD Rule 1113
  • Pot life 30 / 15 / 8 minutes on the TDS temperature chart; protect from water for 24 hours
  • Standard tint colours: RAL 3009, 1001, 7030, 7038 and 7046

Apply it within 48 hours (ideally 24) of the base screed, at 8 to 10 mils. Over a CPU screed, coverage is about 187 sq ft at 8 mils per kit. Application temperature is 8 °C to 30 °C. Tint the mix on site with Mapecolor Paste. The cured film is matte.

In stock at our Surrey warehouse — request a quote for project pricing.

View Technical Information

Safety Data Sheet (PDF)

Request a Quote

Description

Description

Mapefloor CPU/TC is a polyurethane-cement topcoat for horizontal and vertical surfaces. We supply it to seal and finish Mapefloor CPU systems.