Concrete

Planibond AE Fast

Planibond AE Fast is a rapid-setting, high-strength, moisture-tolerant, two-component, 100%-solids epoxy anchoring gel for vertical and horizontal bonding and repair. Typical uses are doweling rebar and tie bars, and anchoring rods or bolts. It has zero VOC and is solvent-free.

  • Meets ASTM C881 Types I, II, IV and V, Grade 3, Classes A, B and C
  • Zero VOC; 100% solids and solvent-free
  • Gel time 7 minutes (ASTM C881)
  • Compressive strength 10,000 psi / 70.0 MPa (ASTM D695)
  • Bond strength > 1,000 psi at 2 days and > 1,500 psi at 14 days (ASTM C882)
  • Packaging: 600 mL dual cartridge (and 7.57 L kit as described on the TDS)

Compared with standard Planibond AE, this grade can be used on concrete as little as 3 to 7 days old when the slab is properly prepared. Gel time is 7 minutes (ASTM C881). Use it on substrates between 0 °C and 41 °C, after preconditioning the cartridges. It is supplied in a 600 mL (20.3 US oz) dual cartridge; 7.57 L kits are also described on the data sheet.

In stock at our Surrey warehouse — request a quote for project pricing.

View Technical Information

Safety Data Sheet (PDF)

Request a Quote

Category:
Description

Description

Planibond AE Fast is a rapid-setting version of Planibond AE epoxy anchoring gel. We offer it for anchoring jobs that need a quicker cure.