Concrete Repair

Epojet LV

Epojet LV [NA] is a moisture-tolerant, two-component, 100%-solids, very low-viscosity epoxy injection resin for structural repair of cracks in properly prepared concrete (at least 28 days old, stable and free of standing water) and masonry. It is also used for gravity feed, following ACI RAP-2 and ACI 503.7-07.

  • Meets ASTM C881 Types I, II, IV and V, Grade 1, Classes A and B (except gel time); also AASHTO M235 and USDA food-processing specifications
  • Viscosity 170 cps (ASTM D2393)
  • Gel time 60 minutes for a 60 g mass at 23 °C (ASTM C881)
  • Compressive strength 12,720 psi / 87.7 MPa (ASTM D695)
  • Typical VOC 13 g/L, and less than 50 g/L, under SCAQMD Rule 1168
  • Packaging: 399 mL dual cartridge or 11.4 L (3 US gal) kit

Mix ratio is 2:1 by volume. It comes in a 399 mL (13.5 US oz) dual cartridge and an 11.4 L (3 US gal) kit. Acclimate the material to 18 °C–29 °C before use.

In stock at our Surrey warehouse — request a quote for project pricing.

View Technical Information

Request a Quote

Category:
Description

Description

Epojet LV is a very low-viscosity epoxy injection resin for structural repair of hairline and fine cracks in concrete. We supply it where standard injection epoxy cannot penetrate.