Concrete Repair

Epojet

Epojet [NA] is a two-component, 100%-solids, low-viscosity epoxy resin for pressure injection and structural repair of cracks in properly prepared concrete (at least 28 days old, stable and free of standing water) and masonry. It is also used for gravity feed, following ACI RAP-2 and ACI 503.7-07.

  • Meets ASTM C881 Types I, II and IV, Grade 1, Class C (except gel time); also AASHTO M235 and USDA food-processing specifications
  • Viscosity 410 cps (ASTM D2393); gel time 30 minutes for a 60 g mass at 23 °C (ASTM C881)
  • Compressive strength 12,180 psi / 84 MPa (ASTM D695); tensile strength 7,510 psi / 51.8 MPa (ASTM D638)
  • Bond strength 1,320 psi at 2 days and 2,754 psi at 14 days (ASTM C882)
  • Typical VOC 12 g/L, and less than 50 g/L, under SCAQMD Rule 1168
  • Packaging: 399 mL dual cartridge or 11.4 L (3 US gal) kit

Mix ratio is 2:1 by volume. It comes in a 399 mL dual cartridge and an 11.4 L (3 US gal) kit. Acclimate the material to 18 °C–29 °C before use. Certified to NSF/ANSI/CAN 61 (see WQA listings for restrictions).

In stock at our Surrey warehouse — request a quote for project pricing.

View Technical Information

Request a Quote

Category:
Description

Description

Epojet is a two-component, low-viscosity epoxy for pressure injection and structural repair of cracks in concrete. We supply it in cartridges and bulk kits.