Concrete Repair

Tilt Finish

Tilt Finish is a fast-setting, polymer-modified smoothing compound for concrete. MAPEI makes it to produce a smooth, light-grey featheredge finish that blends with surrounding concrete before paint or coatings. Uses include interior and exterior tilt-wall systems, poured-in-place patches, pre-cast beams and columns, and a render for masonry.

  • Polymer-modified, fast-setting; colour light grey; VOC 0 g/L
  • Compressive strength greater than 2,000 psi (13.8 MPa) at 28 days (ASTM C109)
  • Compatible with most coatings, paints, sealers, dyes and concrete stains (verify before use)
  • Coverage about 60 sq ft (5.57 m²) per 20 lb bag at 1.5 mm (1/16 in)
  • Can be lightly sanded when hard; paint with a compatible water-based coating in 24 hours
  • Packaging: 20 lb (9.07 kg) bag; shelf life 1 year unopened at 23 °C

Install from a featheredge to 3 mm (1/8 in), or up to 12 mm (1/2 in) in confined areas such as honeycombs and form-tie holes. Bags are 20 lb (9.07 kg), mixed with 3.25 to 3.46 US qt of water. Compatible coatings can go on in as little as 24 hours. The material is self-curing.

In stock at our Surrey warehouse — request a quote for project pricing.

View Technical Information

Safety Data Sheet (PDF)

Request a Quote

Category:
Description

Description

Tilt Finish is a polymer-modified smoothing and finishing compound for concrete. We carry it for preparing tilt-up walls and other concrete surfaces before paint or coatings.