Sika

Sikafloor-219 UTE

Request a Quote

Description

Description

Sikafloor-219 UTE is a two-component, high-solids, low-odour clear epoxy that can be used clear or tinted with Sikafloor Epoxy Pigment Pack CA. It is typically installed as a primer, broadcast binder or high-build coating on concrete and prepared steel. It meets CFIA requirements for food plants. The current “new formula” is not compatible with the previous formula (purple sticker on the pack).

  • Shore D hardness about 80 (ASTM D2240); tensile strength about 44 MPa (6,381 psi) (ASTM D638)
  • Abrasion about 0.034 g loss, CS-17 / 1,000 cycles (ASTM D4060); pull-off greater than 2.5 MPa (363 psi), substrate failure
  • About 5 m²/L (203 sq ft per US gal) as a primer at 8 mils, or 2.6 m²/L (106 sq ft) as a wear coat at 15 mils
  • Shelf life 2 years; store at 5 °C to 32 °C; PDS June 2026, Version 01.07

The clear mix ratio is 2:1 by volume (A:B). VOC is about 28 g/L. Apply between 10 °C and 30 °C. Pot life is about 25 minutes. At 23 °C, foot traffic is about 24 hours. Kits are 11.35 L and 28.35 L.

In stock at our Surrey warehouse — request a quote for project pricing.